Technology

[edit] Electrophoretic

Schema of an Electrophoretic Display

Schema of an Electrophoretic Display Using Color FiltersAn electrophoretic display is an information display that forms visible images by rearranging charged pigment particles using an applied electric field.

In the simplest implementation of an electrophoretic display, titanium dioxide particles approximately one micrometre in diameter are dispersed in a hydrocarbon oil. A dark-colored dye is also added to the oil, along with surfactants and charging agents that cause the particles to take on an electric charge. This mixture is placed between two parallel, conductive plates separated by a gap of 10 to 100 micrometres. When a voltage is applied across the two plates, the particles will migrate electrophoretically to the plate bearing the opposite charge from that on the particles. When the particles are located at the front (viewing) side of the display, it appears white, because light is scattered back to the viewer by the high-index titania particles. When the particles are located at the rear side of the display, it appears dark, because the incident light is absorbed by the colored dye. If the rear electrode is divided into a number of small picture elements (pixels), then an image can be formed by applying the appropriate voltage to each region of the display to create a pattern of reflecting and absorbing regions.

Electrophoretic displays are considered prime examples of the electronic paper category, because of their paper-like appearance and low power consumption.

Examples of commercial electrophoretic displays include the high-resolution active matrix displays used in the Amazon Kindle, Sony Librie, Sony Reader, and iRex iLiad e-readers. These displays are constructed from an electrophoretic imaging film manufactured by E Ink Corporation. The Motorola Motofone is the first mobile phone which uses the technology to help eliminate glare from direct sunlight during outdoor use[6].

Another producer of electrophoretic displays is the California based company SiPix[7]. Sipix, along with manufacturing partner SmartDisplayer, received a 1996 Society for Information Display Gold Award for an IC smart card with an integrated electrophoretic display[8].

Electrophoretic displays can be manufactured using the Electronics on Plastic by Laser Release (EPLaR) process developed by Philips Reasarch to enable existing AM-LCD manufacturing plants to create flexible plastic displays.

In the 1990s another type of electronic paper was invented by Joseph Jacobson, who later co-founded the E Ink Corporation which formed a partnership with Philips Components two years later to develop and market the technology. In 2005, Philips sold the electronic paper business as well as its related patents to Prime View International. This used tiny microcapsules filled with electrically charged white particles suspended in a colored oil.[9] In early versions, the underlying circuitry controls whether the white particles were at the top of the capsule (so it looked white to the viewer) or at the bottom of the capsule (so the viewer saw the color of the oil). This was essentially a reintroduction of the well-known electrophoretic display technology, but the use of microcapsules allowed the display to be used on flexible plastic sheets instead of glass.

One early version of electronic paper consists of a sheet of very small transparent capsules, each about 40 micrometres across. Each capsule contains an oily solution containing black dye (the electronic ink), with numerous white titanium dioxide particles suspended within. The particles are slightly negatively charged, and each one is naturally white.[5]

The microcapsules are held in a layer of liquid polymer, sandwiched between two arrays of electrodes, the upper of which is made from indium tin oxide, a transparent conducting material. The two arrays are aligned so that the sheet is divided into pixels, which each pixel corresponding to a pair of electrodes situated either side of the sheet. The sheet is laminated with transparent plastic for protection, resulting in an overall thickness of 80 micrometres, or twice that of ordinary paper.

The network of electrodes is connected to display circuitry, which turns the electronic ink 'on' and 'off' at specific pixels by applying a voltage to specific pairs of electrodes. Applying a negative charge to the surface electrode repels the particles to the bottom of local capsules, forcing the black dye to the surface and giving the pixel a black appearance. Reversing the voltage has the opposite effect - the particles are forced from the surface, giving the pixel a white appearance. A more recent incarnation[10] of this concept requires only one layer of electrodes beneath the microcapsules.

[edit] Bistable LCD

Some companies also produce epaper displays based on bistable LCD technology. The french company Nemoptic commercializes bistable nematic epaper displays (B&W and color) based on a unique principle called "surface anchoring breaking". The technology used, called BiNemÐ'®, has two stable states, the Uniform (U) state and the Twisted (T) state, which are selected by applying simple pulses. Once either state is selected, it stays like it is forever without consuming any additional power. An electrical pulse drives from one state to the other one. This pulse first lifts the molecules on the surface with the weak anchoring layer up to the point where the anchoring is broken. Then, depending on the shape of the falling edge of the pulse, the molecules organize either in U or T state. Bistable LCD diplays offer high reflectivity, resolution up to 200 ppi and a quite neutral white point.

[edit] Other technologies

Electronic paper has also been produced using technologies such as cholesteric LCD (Ch-LC). Other research efforts into e-paper have involved using organic transistors embedded into flexible substrates,[11][12] including attempts to build them into conventional paper.[13] Simple color e-paper[14] consists of a thin colored optical filter added to the monochrome technology described above. The array of pixels is divided into triads, typically consisting of the standard cyan, magenta and yellow, in the same way as CRT monitors (although using subtractive primary colors as opposed to additive primary colors). For commercial releases of e-paper in the forms of newspapers etc, it will most likely be in the 'CMYK' format, for clarity of writing. The display is then controlled like any other electronic color display.

...