Essays24.com - Term Papers and Free Essays
Search

Cisco 805 Password Recovery

Essay by   •  March 12, 2011  •  759 Words (4 Pages)  •  1,646 Views

Essay Preview: Cisco 805 Password Recovery

Report this essay
Page 1 of 4

This came from the cisco site and is not my own:

Introduction

This document describes the procedure for recovering an enable password or replacing enable-secret passwords on Cisco 801, 802, 803, 804, 805, 811, and 813 Series Routers. These passwords are used to protect access to privileged EXEC and configuration modes. The enable password can be recovered because it is displayed in plain text in the configutaion file. The enable-secret password is encrypted in the configuration file and therefore can only be replaced with a new password.

Prerequisites

Requirements

There are no specific requirements for this document.

Conventions

For more information on document conventions, see the Cisco Technical Tips Conventions.

Step-by-Step Procedure

Use the following procedure to perform password recovery on the 8xx Series Routers.

You may encounter booting problems with the Cisco 801, 802, 803, 804, 805, 811 and 813 Series Routers. Cisco 801-805, 811, and 813 routers boot into TinyROM at power-up or after saving any configuration from the console port using Cisco IOSÐ'® Software Release 12.1(3) and later. For details of the affected unit serial number and the procedure to solve the booting problem, see Field Notice: Cisco 801-805 and Cisco 811 and 813 Boots into TinyROM.

Note: To recover a password on Cisco 806, 826, 827, 828, 831, or 837 Series Routers, refer to Password Recovery Procedure for the Cisco 806, 827, and 837 Series Routers.

Attach a terminal or PC with terminal emulation to the console port of the router. Use the following terminal settings:

9600 baud rate

No parity

8 data bits

1 stop bitThe required console cable specifications are described in Cabling Guide for Console and AUX Ports.

Use the power switch to turn the router off and then turn it back on.

Press Break on the terminal keyboard within 60 seconds of the power-up to put the router into ROMMON.

If the break sequence doesn't work, see Possible Key Combinations for Break Sequence During Password Recovery for other key combinations.

Type set at the boot# prompt and record the current value of the configuration register (set by the "ios-conf" variable):

boot# set

set baud =9600

set data-bits =8

set parity =none

set stop-bits =1

set console-flags =0

set mac-address =0050.7307.C329

set unit-ip =10.200.40.65

set serv-ip =255.255.255.255

set netmask =255.255.252.0

set gate-ip =10.200.40.1

set pkt-timeout =8

set tftp-timeout =16

set boot-action =flash

set file-name ="c800-nsy6-mw.122-10b.bin"

set watchdog =off

set

...

...

Download as:   txt (4.3 Kb)   pdf (79.3 Kb)   docx (10.6 Kb)  
Continue for 3 more pages »
Only available on Essays24.com
Citation Generator

(2011, 03). Cisco 805 Password Recovery. Essays24.com. Retrieved 03, 2011, from https://www.essays24.com/essay/Cisco-805-Password-Recovery/34789.html

"Cisco 805 Password Recovery" Essays24.com. 03 2011. 2011. 03 2011 <https://www.essays24.com/essay/Cisco-805-Password-Recovery/34789.html>.

"Cisco 805 Password Recovery." Essays24.com. Essays24.com, 03 2011. Web. 03 2011. <https://www.essays24.com/essay/Cisco-805-Password-Recovery/34789.html>.

"Cisco 805 Password Recovery." Essays24.com. 03, 2011. Accessed 03, 2011. https://www.essays24.com/essay/Cisco-805-Password-Recovery/34789.html.